≡
✏️ Blog 🌍 Travel ✅ Subscribe 👍 Donate
🔍
👤
20 march 2024
Notes from the Garage #2: Printing Stickers, T-Shirts, and Vinyl Car Decals at Home
This post is available in other languages 👉
Español
Русский
简体中文

Thought it was all over after episode one? Nope.

Look what just showed up at my door 👇

For about five years now, I've wanted to print my own shitty stickers, vinyl decals, and T-shirts. Trouble is, the local print shops want big bucks and have a minimum order of 100.

What am I supposed to do with a hundred stickers of a shitty meme, the Arch Linux logo, or the Albanian flag when I only want one?

Take the side window of my van, Busya. I'm on my third year of sticking travel stickers on it. A little chronicle of my travels. Something to inspire the people parked next to me as they walk by.

Two years and the whole damn lot has faded :(
Two years and the whole damn lot has faded :(

At first, I really did traipse around the souvenir shops in every new city, overpaying for nice stickers with local emblems. Three, five, seven euros a pop.

The problem is, a couple of years later, even the overpriced-tourist-sucker stickers had all faded to hell. Turns out the sun and its UV rays don't give a shit where I bought them or how much I paid :)

And the lettering on the side, every last letter of which I'd carefully cut out with scissors from ultra-thick waterproof vinyl as thick as a fingernail? A couple of seasons in the sun and that started to warp too.

The letters warped
The letters warped
And the mountains peeled off (plus a pigeon shat on them)
And the mountains peeled off (plus a pigeon shat on them)

Basically, this whole collection needs replacing every couple of years, laptop stickers included. Getting a new laptop is an outright tragedy: some of those stickers came all the way from Moscow with me, and I've only got one of each.

Long story short, now that I've got a DIY room at home, I decided I wanted to start making my own stickers! Not on an industrial scale. Just for the joy of it.

To that end, intensive research was conducted and some equipment was purchased. Thought I'd come tell you about it too, in case it's your kind of thing.



YouTube is full of sticker-making tutorials for every taste and budget, from home setups to huge automated workshops.

We're going to start with the dirt-cheap option, as is tradition. Are we doing DIY at home or what?

All you need to get started is an inkjet printer and some A4 sheets of vinyl to shove into it. Oh, and scissors. That's pretty much it.

Vinyl, specifically. Something like this. Regular sticker paper won't do. Look for vinyl, preferably glossy. Pictures always look juicier on gloss. ? That's why Apple makes all its screens glossy, right?

The trouble with paper is that even if you're just printing stickers for your laptop, after a couple of months riding around in your backpack, your pictures will have picked up all the crud in the world. And if you manage to wipe it off, the paper's coming with it.

Vinyl stickers, on the other hand, you can just wipe down with a damp, soapy cloth and show them off for another couple of years.

And that's before we get to the more hardcore use cases: stickers for your car, phone, bike, snowboard, or favorite helmet. You can imagine what'll happen to paper the first time it gets caught in the rain or snow.

Vinyl is water-resistant. Paper isn't. That's why paper's so much cheaper.

Unlike paper, vinyl is pretty hard to tear by hand. That's one way to tell them apart
Unlike paper, vinyl is pretty hard to tear by hand. That's one way to tell them apart

Next, shove a sheet of vinyl into your inkjet printer.

A laser printer won't do either. It heats the toner to 300–400°C, and when that hot powder blasts your vinyl, the stuff just wrinkles up, peels off its backing, and sticks to every roller inside your printer.

You are now, obviously, having a bad time. Let's not do that.

Yes, laser printers are fucking great, they're fast, they've been the standard for ages, and I've even managed to “carefully” print stickers on my Kyocera laser printer a few times. But that was the exception.

Usually I'd just fry the whole damn thing and have to take the printer apart. So I recommend getting a second printer: a good old inkjet.

The good news: nobody fucking wants inkjets these days. You can get a photo printer with decent DPI for three bowls of rice. In Berlin people just leave them out on the street for anyone to take, because the ink costs more than the printer itself.

After a little deliberation, I found a basic “used” ? Amazon has a whole section for stuff people bought and then returned under warranty. Sometimes you can snag something interesting for half price, with the same warranty. Worth a look Epson EcoTank printer on Amazon for something like 80 euros, complete with a built-in continuous ink supply system (so I'm not stuck buying overpriced cartridges). If you go with cartridges, you can find one for 30 euros or so. And that's here in expensive old Germany, so I'm sure you can find one back home for a couple hundred rubles.

Printing some test doggos!
Printing some test doggos!

If you're doing this on a shoestring, that's plenty.

Throw your stickers together in Photoshop, print them, cut them out carefully with scissors, and look at you, you magnificent creature! For one-off stickers in simple shapes, it's not a bad option at all.

I ran a few experiments specifically to see how well they'd hold up. I tried scraping the ink off the vinyl with a knife, washing it off with water, and rubbing it off with isopropyl alcohol.

The little guys didn't give a shit about water or alcohol, even with a good hard scrub. Picking at them with a fingernail didn't bother them either. A knife blade, on the other hand, does scrape the ink off vinyl pretty easily.

Of course, you could grumble in the comments that I should've shelled out for a UV printer, which cures the ink with UV light, instead of playing around with my broke-ass home inkjet setup.

But there's a much simpler option. Just the thing for us cheapskates: laminate them!

Laminating basically means sticking a layer of clear film (also vinyl) on top. Like a screen protector for your phone. Laminating film comes in sheets or rolls too.

The hardest part of the whole process is getting it on straight without bubbles, but that just takes practice. By the second or third try you start getting the hang of it, even without any special tools. Just a plastic card (or a scraper) and a little care.

Some films offer UV protection ? honestly, I'm not entirely sold on how much protection they offer. Let's see in a couple of years . If you want to make car stickers that won't fade after a year in direct sunlight, that's the stuff to look for!

So if you print your stickers on an inkjet in High Quality Photo mode, where the printer takes its sweet time and does a thorough job, then stick a layer of laminate on top, your pictures will already look great, and they'll be protected from scratches and water for at least a couple of years.



Honestly, unless you're planning a career in stickers, you could stop right there. That's enough to cover yourself in stickers up to your ears and enjoy life.

But there's always that next step on the horizon: printing complex shapes. The kind where scissors just won't cut it, or it'll take forever.

That's where our second gadget comes in: a cutting plotter.

This is the Silhouette Cameo 4.

I got mine on sale for 220 euros. The fifth version had just come out, so the fours were going cheap. Normally an entry-level “home” cutter will run you around 300–500 bucks.

A cutting plotter is a device that can cut any shape you like out of paper, vinyl, fabric, or pretty much any other material you can shove into it.

Basically, automated scissors. Except you control the shape, speed, pressure, and even how deep the blade goes. So you can do a “kiss cut,” where the blade cuts only the top layer of vinyl, leaving the stickers on a sheet so you can peel them off individually, or a “die cut,” where it goes all the way through the paper.

In the photo above you can see that my cutter has a second tool holder. Put a felt-tip pen in there and it'll “draw” whatever vector image you load into it. Or it can score grooves in heavy cardstock, like you sometimes see on business cards.

Basically, a cutting plotter is like a CNC machine for materials up to 5 mm thick. Maximum blade pressure: 5 kilograms. Just don't dull the blade or you'll have to buy a new one for 20 euros.

And yes, 200+ bucks is still a lot for a toy to play with at home. But thanks to this post I can legitimately write it off on my taxes)0)) Thanks, guys!

Plus, all my friends now get a personalized set of fucking awesome stickers for their birthday, which is nice too :3

So yeah, simple shapes like flags and coats of arms are no problem with scissors, but try cutting something intricate by hand and it'll come out looking like crap. Better to let the machine do it.

Cut out a dog!
Cut out a dog!

I was choosing between three “home” brands available over here in Europe: Cricut (the most popular), Brother ScanNCut, and Silhouette.

I went with the last one. Do your own research, though. It's not that clear-cut.

Cricut is the Apple of cutting plotters. Their app is fucking brilliant. Even a kid could turn any pictures into a sticker pack in literally a couple of clicks. Fucking great UX, a joy to use. Except it all runs through the cloud, only works with “Party-approved” formats, and wants you to pay $9 a month for a subscription. Yes, a monthly subscription for a device you've ALREADY paid 300–400 bucks for. Fucking hell.

LTT did a video on the Cricut Maker 3 a while back. Linus's wife does a genuinely good job explaining the different attachments and shows things you can make with it: toys, engravings on leather, that sort of thing. Worth a watch. I fell for it myself at first, but thankfully I had the sense to download the app and play with it BEFORE buying the actual gizmo, so I found out about the monthly subscription in time. Dodged that one.

Brother Scan'n'Cut is about as Japanese as it gets. It's got a killer feature: a built-in scanner. It can scan any drawing you've made and cut it out without you even having to use the software.

But the moment you need to tweak anything, their software is a total clusterfuck straight out of the '90s. It's a fucking monster of a vector editor that can theoretically do anything, but you practically need to take a course on YouTube to figure it out. Undaunted, I actually gave it a go, because I AM AN ENGINEER. But not only was the app a beast to run, it also crashed on me every 10 minutes, losing all my changes. Cursed.

So I got a Silhouette, which is somewhere in between. The software is still from the last century, but if you prep your images in your usual editor first, you can just drag and drop them onto the sheet, set the offsets, and hit “print.”

Silhouette Studio. The registration marks in the screenshot let the cutter match the cut to the size of the printed image. The crosshatched areas are places you can't cut
Silhouette Studio. The registration marks in the screenshot let the cutter match the cut to the size of the printed image. The crosshatched areas are places you can't cut

Yes, it's a two-step process: print the sheet on the printer, then feed it into the cutter. But you don't need the precision of a surgeon. Even cheap cutters have an optical sensor on the carriage that runs over the sheet first, looking for special registration marks. The cutter uses those to scale the cut line so it lines up perfectly with your stickers.

I didn't know about those marks at first and actually tried to line up the sheets perfectly by hand, then wondered why nothing matched up anyway. So don't forget to turn on registration marks BEFORE printing. Usually it's a single button right there in the app.

The cutter's optical sensors scan those marks around the edges to figure out the actual size of your image, because every printer is going to be off by a bit
The cutter's optical sensors scan those marks around the edges to figure out the actual size of your image, because every printer is going to be off by a bit
The blades come in cartridges you can swap out (or make your own)
The blades come in cartridges you can swap out (or make your own)
I pulled the “stinger” out and took a shot at 10x zoom just to show you
I pulled the “stinger” out and took a shot at 10x zoom just to show you


While I'm playing around with stickers, I've already got a few other ideas brewing for what I could do with a cutting gizmo this versatile.

The second most popular thing to do is stock up on heat transfer paper. You can print any image on it or cut one out of it, then use a heat press (or a regular iron, since we're doing this on the cheap) to transfer it onto a T-shirt or any other piece of clothing.

That's how people do it on mainstream sites like Etsy or Vsemayki.ru. It doesn't last long, but it's fun. It'll do for a festival or a company party!

Applying a transfer with a heat press
Applying a transfer with a heat press

Next I'd like to play around with rolls of vinyl. That's what people cut lettering out of for a car or an apartment wall. Since it comes on a roll, you're only limited by the width, not the length. So you can cut some seriously big letters.

They want a whole 200 euros for a vinyl decal this size here!
They want a whole 200 euros for a vinyl decal this size here!

You could try cutting soft plastic too. There's a special kind of polystyrene that shrinks and hardens when heated (shrink plastic). People make keychains, pins, and other little toys out of it.

You can cut keychains out of plastic
You can cut keychains out of plastic

Oh, and cutting plotters are how people make those graffiti stencils! But vandalism is bad, m'kay?



Are we living in a cyberpunk future or what? Sitting around drawing my own pictures is beneath me. Or worse, stealing them off the internet and violating somebody's copyright.

Let's let generative AI finally replace us, like everyone keeps promising. Take Bing Image Creator, for instance. It runs DALL·E 3 under the hood, and it's completely free (up to some daily limit, but it's usually enough for me).

Sign up, open it, and bang out some dumb prompt like “a sticker of a cute anime girl eating a Berlin döner.” Boom:

Try a couple dozen funny prompts and you could start selling sticker packs. Go into business, even.

The big problem, though, is that these things get more heavily censored by the day. Almost all my ideas for funny sticker packs, like “Tim Cook yelling at the EU over its App Store regulations, angrily waving a fistful of USB-C cables,” got blocked on the spot for “violating content policy.”

No fun to be had with these corporate AIs.

Luckily, you can always download AUTOMATIC1111 or Draw Things App and play around with all kinds of Unstable Diffusion models right on your laptop. No censorship there.

Would we be us if we didn't?
Would we be us if we didn't?


Comments 👇
More? Here you go